How to weight groups of criteria (sections) in 360 to make some more important than others
To achieve procurement objectives, a good answer to an important criterion must be weighted more highly than a good answer to a trivial criterion
360 uses comparison-of-importance (this criterion is relatively more important than that criterion) in its underlying algorithms to determine the best value for money.
In short, the important criterion must have a higher relative weight then the trivial criterion.
Step-by-step guide
To assign a weight to a section
- Sign-in to https://360users.apetsoftware.com.au/ as the Request Manager
- From the main menu, click Requests
- If using the new look:
- Click Drafts
- Click Configure against the desired request
- If using the old look:
- Select the request from the list
- Click on the icon
- Click on either:
- icon of the section that will be weighted (made more or less important) or
- One of the Section which you want to add weight/importance.
- If clicked on one of the Section
- Click Edit
- Enter the desired Relative Weight of this section compared to other sections
- Click Update
At this point, You have successfully updated the weight of a section.
Relative weighting is applied to both questions and sections.
- The executive team should identify importance at a macro level (section weightings)
For example: "Environmental Management" may be equally important as "Community Consultation" and only half as important as "Structural Integrity", so the sections' relative weights would be 5, 5, 10 (or a similar ratio) - The subject matter experts should identify importance at a micro-level (question weightings)
For example: "Spill Containment Measures" maybe not be quite twice as important as "Dust Containment Measures", so the questions' relative weights would be 18, 10 (or a similar ratio)
Don't be tempted to use percentages. Relative weights are far easier to work with than percentages, and 360 will calculate percentages for you.
Related articles
- What are the key terms in 360? (definitions/lexicon)
- How to add a section (group of questions) to a request in the 360 internal portal
- How to weight criteria (questions) in the 360 internal portal to make some more important than others
- How to review and adjust the weights of all criteria (sections and questions) simultaneously in the 360 internal portal
- How does the VFM (value for money) algorithm work in 360?
Terms of use
Visitors who are not part of the intended audience (as specified on this space's overview page) may not access this content.
If you are accessing content for which you are not the intended audience you may not use it for any purpose.
As private content can be published in error, if in doubt, you are not the intended audience.
Copyright © - Sharrowlane Pty Ltd